Proudly Serving Calgary and the Greater Area
Proudly Serving Calgary and the Greater Area
Post Image
30 Dec, 2021
Posted by Platinum Electrical Services
0 comment

Electrical Tips To Help Prepare Your Home For The Winter


Winter is a time for holiday joy and family get-togethers. But between all the partying, baking, and extra lights throughout the house, your home’s electrical system may take a bit of a beating. So, to give you an idea of what measures you may take to prepare your home’s electrical systems for the winter, here are some electrical tips to get you started.


How To Prepare Your Electrical System In Wintertime

 It’s never too late to winterize your electrical system since it might save you a lot of money on your power bill. More importantly, it can protect your home. Of course, nobody wants to deal with utility problems on their time off. Don’t worry, though – once you get everything under control, you’ll be in a much better position to enjoy your time with family and friends.

Here are some simple tasks that you can do to ensure that your system is ready for the colder months.


1) Fix Frayed Wires and Cables

Winter is the time for various animals and pests to sleep. And sometimes, they enter your attic, basement, or even the walls of your home to enjoy their three to four months of rest. As they move around, they may come into contact or even bite your wires and cables, causing damage to the insulation. To keep dangerous exposed wires from harming your family, make sure you inspect your cables and wiring to look out for any damage. If you find anything frayed or loose, hire a licensed electrician to fix it as soon as possible.


2) Test Your Wiring and Prepare Backup Systems

PES - Electrical Tips To Help Prepare Your Home For The Winter - 1


Wires can fray due to age, corrosion, or physical damage. When they become tattered, they might cause electrical problems in your home by creating shorts. The presence of frayed wiring may indicate an issue with the electrical connections. If there are defects, you may see burns and black spots near the sockets.

To prevent fires, shorts, and other electrical problems, it’s important to test your wiring. You can do this by using a circuit tester. If you have any doubts about your wiring, have a professional inspect it.

In addition to testing your wiring, also prepare backup systems for power outages. This is especially important during the cold season when you use a lot of energy to heat your home. So, make sure your backup generator is operational. If you don’t use your generator often, test it first by running it for approximately half an hour to ensure it is functioning properly. 

And don’t forget: your generator’s efficiency may be affected by extreme weather conditions. It’s also critical to place the generator in a suitable location and to connect it properly. Low pressure and poor oxygen levels can lead to ignition difficulties in winter, mainly if they occur simultaneously. To minimize ignition failure, set the generator in an enclosure with heating.


3) Check The HVAC System

 Another thing to add to your to-do list is to thoroughly inspect your heating systems and related equipment like the thermostat. Your HVAC unit not only provides warmth but also keeps your home at an acceptable temperature for other domestic appliances. For example, when your furnace fails, it exposes the pipes in your home too low temperatures. Extreme cold might burst your pipes and cause serious harm to your property.

 At the same time, you don’t want your heating system to break down just because the thermostat’s battery has died. So make it a point to double-check the batteries and replace them if necessary. A skilled electrician can assist you in adequately adjusting the thermostat for maximum efficiency. If your thermostat needs repair, do so as soon as possible. Be sure to keep in mind these electrical tips because a faulty thermostat might cause your home’s energy usage to go up. It may also interfere with the furnace’s operation, causing ignition problems.


4) Keep An Eye Out For Moisture Near Sockets

PES - Electrical Tips To Help Prepare Your Home For The Winter - 2

The winter months are frequently associated with high moisture levels due to snowfall and cooler temperatures. It’s essential to check your property for any moisture accumulation on walls or floors near any sockets or electrical wiring. Sparks or electrical surges can occur when damp power outlets are used frequently. At the same time, internal wiring may also be damaged or become prone to short-circuiting due to leaks or condensation.

 To prevent any moisture-related problems, it’s important to keep an eye out for these indicators and take corrective action as necessary. Aside from cleaning them up and maintaining a dry environment, an expert electrician should fix any damaged components before being reintroduced. Furthermore, basic repairs can prevent you from spending a lot of money on significant problems in the future.

back to top